Heavy Equipment Attachments


John Deere 744K High-Lift Wheel Loader

John Deere 744K High-Lift Wheel Loader specs

Dimensions

A: Length with Bucket:
31.6 ft in (9640 mm)
B: Width Over Tires:
9.7 ft in (2957 mm )
C: Wheelbase:
11.4 ft in (3460 mm)
D: Height to Top of Cab:
11.5 ft in (3500 mm)
E: Ground Clearance:
1.5 ft in (460 mm)
F: Hinge Pin - Max Height:
15.7 ft in (4800 mm)
G: Dump Clearance:
11.8 ft in (3610 mm)
H: Reach at Max Lift:
4.5 ft in (1380 mm)

Engine

Make:
John Deere
Model:
6090H, Tier III certified
Net Power:
304 hp (226.7 kw)
Power Measured @:
1500 rpm
Displacement:
548 cu in (9 L)
Torque Measured @:
1400 rpm
Number of Cylinders:
6
Max Torque:
1074 lb ft (1456.1 Nm)
Torque Rise:
47%
Aspiration:
Turbocharged charge air cooled

Operational

Operating Weight:
54526.9 lb (24733 kg)
Fuel Capacity:
123.9 gal (469 L)
Hydraulic System Capacity:
42 gal (159 L)
Engine Oil Fluid Capacity:
9 gal (34 L)
Cooling System Fluid Capacity:
11.9 gal (45 L)
Transmission Fluid Capacity:
7.4 gal (27.9 L)
Front Axle/Diff Fluid Capacity:
12.2 gal (46 L)
Rear Axle/Diff Fluid Capacity:
12.2 gal (46 L)
Static Tipping Weight:
34784.5 lb (15778 kg)
Turning Radius:
20.6 ft in (6280 mm)
Operating Voltage:
24 V
Alternator Supplied Amperage:
80 amps
Rear Axle Oscillation:
26 degrees
Tire Size:
26.5 R 25

Transmission

Type:
Countershaft, powershift
Forward Gears:
4
Reverse Gears:
3
Max Speed (Forward):
24.9 mph (40 km/h)
Max Speed (Reverse):
18.8 mph (30.2 km/h)

Hydraulic System

Pump Type:
two variable displacement, load-sensing axial piston
Relief Valve Pressure:
3288 psi (22669.9 kPa)
Pump Flow Capacity:
136 gal/min (515 L/min)
Raise Time:
5.9 sec
Dump Time:
1.4 sec
Lower Time:
2.8 sec

Bucket Specs

Breakout Force:
38433 lb (171 kN)
Dump Clearance:
11.8 ft in (3610 mm)
Bucket Width:
10.7 ft in (3270 mm)
Bucket Capacity (Heaped):
5.2 yd3 (4 m3)
Bucket Capacity (Struck):
4.4 yd3 (3.4 m3)


TRK ATTACHMENTS INC CANNOT GUARANTEE THAT THE John Deere 744K High-Lift Wheel Loader SPECIFICATIONS TO BE ERROR-FREE OR COMPLETE. THE ABOVE SPECIFICATIONS ARE PROVIDED "AS IS" AND WITHOUT ANY WARRANTY OF ANY KIND, EXPRESSED OR IMPLIED.