Heavy Equipment Attachments


Caterpillar 950H Wheel Loader

Caterpillar 950H Wheel Loader specs

Dimensions

A: Length with Bucket:
26.2 ft in (7988 mm)
B: Width Over Tires:
9.2 ft in (2784 mm )
C: Wheelbase:
11 ft in (3350 mm)
D: Height to Top of Cab:
11.3 ft in (3452 mm)
E: Ground Clearance:
1.4 ft in (412 mm)
F: Hinge Pin - Max Height:
13.1 ft in (3992 mm)
G: Dump Clearance:
9.6 ft in (2922 mm)
H: Reach at Max Lift:
3.9 ft in (1202 mm)

Engine

Make:
Caterpillar
Model:
C7 ACERT
Net Power:
197 hp (147 kw)
Gross Power:
217 hp (162 kw)
Power Measured @:
1800 rpm
Displacement:
439 cu in (7.2 L)
Number of Cylinders:
6
Max Torque:
669 lb ft (907 Nm)

Operational

Operating Weight:
40435 lb (18338 kg)
Fuel Capacity:
83 gal (314 L)
Hydraulic System Capacity:
29 gal (110 L)
Engine Oil Fluid Capacity:
7.9 gal (30 L)
Cooling System Fluid Capacity:
11 gal (42 L)
Transmission Fluid Capacity:
9 gal (34 L)
Front Axle/Diff Fluid Capacity:
9.5 gal (36 L)
Rear Axle/Diff Fluid Capacity:
9.5 gal (36 L)
Static Tipping Weight:
27483 lb (12464 kg)
Turning Radius:
23 ft in (7016 mm)
Operating Voltage:
24 V
Alternator Supplied Amperage:
80 amps
Rear Axle Oscillation:
26 degrees
Tire Size:
23.5R25

Transmission

Type:
Powershift
Forward Gears:
4
Reverse Gears:
4
Max Speed (Forward):
23 mph (37 km/h)
Max Speed (Reverse):
24.9 mph (40 km/h)

Hydraulic System

Pump Type:
Piston
Relief Valve Pressure:
1000 psi (6900 kPa)
Pump Flow Capacity:
71 gal/min (270 L/min)
Raise Time:
6.2 sec
Dump Time:
1.3 sec
Lower Time:
2.5 sec

Bucket Specs

Breakout Force:
37125 lb (165 kN)
Dump Clearance:
9.6 ft in (2922 mm)
Bucket Width:
9.6 ft in (2927 mm)
Bucket Capacity (Heaped):
4 yd3 (3.1 m3)
Bucket Capacity (Struck):
3.5 yd3 (2.7 m3)


TRK ATTACHMENTS INC CANNOT GUARANTEE THAT THE Caterpillar 950H Wheel Loader SPECIFICATIONS TO BE ERROR-FREE OR COMPLETE. THE ABOVE SPECIFICATIONS ARE PROVIDED "AS IS" AND WITHOUT ANY WARRANTY OF ANY KIND, EXPRESSED OR IMPLIED.