MOST ATTACHMENTS IN STOCK NOW!
Heavy Equipment Attachments


Kato HD1023II Hydraulic Excavator

Kato HD1023II Hydraulic Excavator specs

Dimensions

A: Width (Outside of Tracks)
9.8 ft in (2990 mm)
B: Length (Track on Ground)
11.4 ft in (3460 mm)
C: Ground Clearance
1.6 ft in (480 mm)
D: Height (Top of Cab)
9.6 ft in (2940 mm)
E: Tail Swing Radius
9.6 ft in (2940 mm)
F: Counterweight Clearance
3.6 ft in (1100 mm)
G: Track Gauge
7.8 ft in (2390 mm)
H: Shoe Size
23.6 in (600 mm)

Option #1: Short Arm 2470mm

O: Max Cutting Height
32.4 ft in (9880 mm)
P: Max Loading Height
22.3 ft in (6810 mm)
R: Max Vertical Wall Digging Depth
18.9 ft in (5750 mm)
S: Max Digging Depth
21.4 ft in (6520 mm)

Option #2: Standard Arm 2960mm

O: Max Cutting Height
33 ft in (10060 mm)
P: Max Loading Height
22.9 ft in (6990 mm)
R: Max Vertical Wall Digging Depth
20.5 ft in (6250 mm)
S: Max Digging Depth
23 ft in (7010 mm)

Option #3: Long Arm 3950mm

O: Max Cutting Height
34.4 ft in (10500 mm)
P: Max Loading Height
24.4 ft in (7440 mm)
R: Max Vertical Wall Digging Depth
23.6 ft in (7190 mm)
S: Max Digging Depth
26.3 ft in (8010 mm)

Engine

Make
Mitsubishi
Model
C 6D34-TL
Gross Power
167.6 hp (125 kw)
Power Measured @
2150 rpm
Displacement
357.6 cu in (5.9 L)
Torque Measured @
1600 rpm
Max Torque
441.1 lb ft (598 Nm)
Number of Cylinders
6
Aspiration
turbocharged

Operational

Operating Weight
50706.3 lb (23000 kg)
Fuel Tank Capacity
100.4 gal (380 L)
Cooling System Capacity
6.7 gal (25.5 L)
Hydrauilc System Capacity
76.6 gal (290 L)
Engine Oil Capacity
5.8 gal (22 L)
Swing Drive Hydraulic Fluid Capacity
3 gal (11.3 L)
Operating Voltage
24 V
Alternator Supplied Amperage
35 amps
Hydraulic System Relief Pressure
4771.7 psi (32900 kPa)
Hydraulic Pump Flow Capacity
130.5 gal/min (494 L/min)

Swing Mechanism

Swing Speed
11 rpm

Buckets

Nominal Bucket Capacity
1.3 yd3 (1 m3)
Minimum Bucket Capacity
0.72 yd3 (0.55 m3)
Maximum Bucket Capacity
2 yd3 (1.5 m3)

Undercarriage

Number of Shoes per Side
47
Shoe Size
23.6 in (600 mm)
Number of Carrier Rollers per Side
2
Number of Track Rollers per Side
8
Ground Pressure
7.3 psi (50 kPa)
Max Travel Speed
3.4 mph (5.5 km/h)
Drawbar Pull
lb (186.3 kN)
Track Gauge
7.8 ft in (2390 mm)


TRK ATTACHMENTS INC CANNOT GUARANTEE THAT THE Kato HD1023II Hydraulic Excavator SPECIFICATIONS TO BE ERROR-FREE OR COMPLETE. THE ABOVE SPECIFICATIONS ARE PROVIDED "AS IS" AND WITHOUT ANY WARRANTY OF ANY KIND, EXPRESSED OR IMPLIED.